Simpact Freeway 1150 Guia do Utilizador

Protogate, Inc.12225 World Trade Drive, Suite RSan Diego, CA 92128Freeway® User GuideDC 900-1333PFebruary 2002

10 DC 900-1333PFreeway User GuideFigure 4–18:Display Circular Queue of Messages... 140Figure 4–19:Display Network Statistics Menu ..

100 DC 900-1333PFreeway User Guide3.2 Customize the Default Boot Configuration FileWhen you followed the software installation procedures in Chapter 2

3: Customize the System ConfigurationDC 900-1333P 101#----------------------------------##ICP0PhysicalParameters ##----------------------------------#

102 DC 900-1333PFreeway User GuideThe boot configuration file allows comment lines to be entered by placing the poundsign (#) at the beginning of a li

3: Customize the System ConfigurationDC 900-1333P 103Device Type The device_type parameter for both ICPs in the example file is ICP2432.This indicates

104 DC 900-1333PFreeway User GuideDownload Script If the service provider owns a device that is downloadable, Freewayexecutes a load program on behalf

3: Customize the System ConfigurationDC 900-1333P 105SRA Module The optional sra_module parameter indicates the name of an objectmodule to be download

106 DC 900-1333PFreeway User GuideVxWorks Shell The vxworks_shell parameter indicates whether or not access to theVxWorks operating system through a c

3: Customize the System ConfigurationDC 900-1333P 107If you are using dual Ethernet or dual fast Ethernet with the elt, fei, or dc type ofinterface, a

108 DC 900-1333PFreeway User Guide3.2.1 Configuration Parameters for ICP_IP Virtual DevicesICP_IP virtual devices behave just like physical ICP boards

3: Customize the System ConfigurationDC 900-1333P 109Socket Type The socket_type parameter must be sock_dgram, sock_stream_listen, orsock_stream_conne

List of FiguresDC 900-1333P 11Figure 4–50:Copy Hard Disk File to Floppy Disk...185Figure 4–51:Floppy Disk Maintenance Options Menu..

110 DC 900-1333PFreeway User GuideTime to Live The ttl parameter specifies the time-to-live of outgoing data packets.Receive Buffer Size The rcv_buf_s

3: Customize the System ConfigurationDC 900-1333P 1113.3 Server TSI ConfigurationWhile building the loopback test program, you modified the client TSI

112 DC 900-1333PFreeway User GuideAll sections of the TSI configuration file have the following format:connection-name{parameter-name = parameter-valu

3: Customize the System ConfigurationDC 900-1333P 113//// source control identifier// @(#)$Id: muxcfg,v 1.6 1998/06/15 21:57:25 jcolston Exp $////----

114 DC 900-1333PFreeway User GuideChanging the AsyncIO parameter to “no” or omitting it prevents the server TSI softwarefrom operating as designed.Cau

3: Customize the System ConfigurationDC 900-1333P 115• The parameters can appear in any order in the configuration file and can beupper-case, lower-ca

116 DC 900-1333PFreeway User Guide

DC 900-1333P 117Chapter4OperationsThe Freeway server provides many facilities to manage its operation, such as:• Server management service provider (S

118 DC 900-1333PFreeway User Guide4.1 Startup and Shutdown ProceduresThe following sections describe the typical sequence of steps used to startup and

4: OperationsDC 900-1333P 119You can also use rlogin (or telnet) to log in to Freeway from the boot server or any othercomputer on the network; for ex

12 DC 900-1333PFreeway User Guide

120 DC 900-1333PFreeway User Guide4.2 Freeway Interactive Menu After you log in as described in Section 4.1.1 on page 118, the Freeway Interactive Men

4: OperationsDC 900-1333P 121NoteAfter entering a selection in a Freeway menu, press <return>. Forexample, to select the first menu choice, ente

122 DC 900-1333PFreeway User Guide4.3 Shutdown OptionsTo access the Shutdown Options menu as shown in Figure 4–2, enter ‘1’ at the FreewayInteractive

4: OperationsDC 900-1333P 123puter on the network, the connection to Freeway is broken when the boot processbegins and you must log in again. The foll

124 DC 900-1333PFreeway User Guide• freeway/boot/bootcfg.pci defines the configuration for a Freeway1100/1150/1200/1300 with ICP2432s (PCI boards)• fr

4: OperationsDC 900-1333P 1254.4 Display OptionsTo access the Display Options menu as shown in Figure 4–3, enter ‘2’ at the FreewayInteractive Menu. F

126 DC 900-1333PFreeway User Guide4.4.1 Display Log MessagesTo retrieve and display log messages stored on the message queue, enter ‘2’ at theDisplay

4: OperationsDC 900-1333P 1274.4.2.1 Display Physical Configuration To display the current values for each device in the Freeway server, enter ‘2’ at

128 DC 900-1333PFreeway User Guide4.4.2.2 Display Service Provider Configuration To display the current values for each service provider in the Freewa

4: OperationsDC 900-1333P 1294.4.2.3 Display Boot ParametersTo display the current Freeway boot parameters, enter ‘4’ at the Display Configurationmenu

DC 900-1333P 13List of TablesTable 2–1: Summary of Software Installation Steps... 30Table 2–2: Protocol Identifiers...

130 DC 900-1333PFreeway User Guide4.4.3 Display Network InformationTo access the Display Network Information menu as shown in Figure 4–8, enter ‘4’ at

4: OperationsDC 900-1333P 1314.4.3.1 Display IP Network Interface InformationTo display the IP network interface information as shown in Figure4–9, en

132 DC 900-1333PFreeway User Guide4.4.3.2 Display IP Network HostsTo display the IP network hosts as shown in Figure 4–10, enter ‘3’ at the Display Ne

4: OperationsDC 900-1333P 1334.4.3.3 Display IP Network Routing TablesTo display the IP network routing tables as shown in Figure 4–11, enter ‘4’ at t

134 DC 900-1333PFreeway User Guide4.4.3.4 Ping Another IP HostTo ping another IP host as shown in Figure 4–12, enter ‘5’ at the Display NetworkInforma

4: OperationsDC 900-1333P 1354.4.4 Display System InformationTo access the Display System Information menu as shown in Figure 4–13, enter ‘5’ atthe Di

136 DC 900-1333PFreeway User Guide4.4.4.1 List I/O DevicesTo list the I/O devices as shown in Figure 4–14, enter ‘2’ at the Display System Informa-tio

4: OperationsDC 900-1333P 1374.4.4.2 Display TCB SummaryTo display the task control block (TCB) summary as shown in Figure 4–15, enter ‘3’ atthe Displ

138 DC 900-1333PFreeway User Guide4.4.4.3 List Free Memory BlocksTo list the free memory blocks as shown in Figure4–16, enter ‘4’ at the Display Syste

4: OperationsDC 900-1333P 1394.4.4.4 Display Task Stack UsageTo display the task stack usage as shown in Figure4–17, enter ‘5’ at the Display SystemIn

14 DC 900-1333PFreeway User Guide

140 DC 900-1333PFreeway User Guide4.4.4.5 Display Circular Queue of MessagesTo display the circular queue of messages as shown in Figure 4–18, enter ‘

4: OperationsDC 900-1333P 1414.4.5 Display Network StatisticsTo access the Display Network Statistics menu as shown in Figure 4–19, enter ‘6’ at theDi

142 DC 900-1333PFreeway User Guide4.4.5.1 Display TCP StatisticsTo display the transmission control protocol (TCP) statistics as shown in Figure 4–20,

4: OperationsDC 900-1333P 1434.4.5.2 Display UDP StatisticsTo display the user datagram protocol (UDP) statistics as shown in Figure4–21, enter‘3’ at

144 DC 900-1333PFreeway User Guide4.4.5.3 Display IP StatisticsTo display the Internet protocol (IP) statistics as shown in Figure 4–22, enter ‘4’ at

4: OperationsDC 900-1333P 1454.4.5.4 Display ICMP StatisticsTo display the ICMP statistics as shown in Figure 4–23, enter ‘5’ at the Display NetworkSt

146 DC 900-1333PFreeway User Guide4.4.6 Display User NamesTo display the user names for the Freeway server as shown in Figure 4–24, enter ‘7’ atthe Di

4: OperationsDC 900-1333P 1474.5 Modify ConfigurationTo access the Freeway Modify Configuration menu as shown in Figure 4–26, enter ‘3’ atthe Freeway

148 DC 900-1333PFreeway User Guide4.5.1 Modify Boot ParametersTo modify the Freeway boot parameter settings, enter ‘2’ at the Modify Configurationmenu

4: OperationsDC 900-1333P 149Figure 4–27: Modify Boot ParametersFreeway System Boot Parameters------------------------------Enter '.' to era

DC 900-1333P 15PrefacePurpose of DocumentThis document describes how to install and operate software on Protogate’s Freewayserver.NoteThe information

150 DC 900-1333PFreeway User GuideTable 4–1: Freeway System Boot Parameter DescriptionsBoot Parameter DescriptionBoot Device Freeway 1100/1150/1200/13

4: OperationsDC 900-1333P 151Processor Number This parameter is the number of server processors in the Freewayserver minus one. Currently, a Freeway s

152 DC 900-1333PFreeway User GuideSystem Boot Directory If the Freeway boot files will be stored in the home directory of the FTP(or RSH) user account

4: OperationsDC 900-1333P 153Gateway Inet Interface If your Freeway and boot server are on the same network, clear thisparameter, which is the default

154 DC 900-1333PFreeway User Guide4.5.2 Modify User NamesTo modify the Freeway user names, enter ‘3’ at the Modify Configuration menu. TheModify User

4: OperationsDC 900-1333P 1554.5.3 Modify System TimeTo modify the current system time for the Freeway server as shown in Figure4–29,enter ‘4’ at the

156 DC 900-1333PFreeway User Guide4.6 Trace FunctionsThe current trace status is shown in parentheses in the Trace Function option in theFreeway Inter

4: OperationsDC 900-1333P 157If you booted Freeway from a local disk, you can use the File Transfer Protocol to movethe file from the local disk to yo

158 DC 900-1333PFreeway User GuideFigure 4–31: Trace Functions MenuTrace Functions---------------1) Return to Interactive Menu2) Turn MSGMUX Trace On3

4: OperationsDC 900-1333P 1594.7 Disk Drive OptionsTo access the Disk Drive Options menu as shown in Figure 4–32, enter ‘5’ at the Free-way Interactiv

16 DC 900-1333PFreeway User Guide• Power cord (Freeway 1300 and 8800 have two power cords)• Set of keys (for hinged front panel on Freeway 1100/1150/1

160 DC 900-1333PFreeway User Guide4.7.1 Hard Disk Copy OptionsTo access the Hard Disk Copy Options menu as shown in Figure 4–33, enter ‘2’ at theDisk

4: OperationsDC 900-1333P 1614.7.1.1 Display Hard Disk DirectoryTo display the hard disk directory as shown in Figure 4–34, enter ‘2’ at the Hard Disk

162 DC 900-1333PFreeway User Guide4.7.1.2 Display Hard Disk FileTo display a hard disk file as shown in Figure 4–35, enter ‘3’ at the Hard Disk CopyOp

4: OperationsDC 900-1333P 1634.7.1.3 Copy Boot Server File to Hard DiskTo copy a boot server file to the hard disk as shown in Figure 4–36, enter ‘4’

164 DC 900-1333PFreeway User Guide4.7.1.4 Copy Hard Disk File to Floppy DiskTo copy a hard disk file to the floppy disk as shown in Figure 4–37, enter

4: OperationsDC 900-1333P 1654.7.1.5 Copy Floppy File to Hard DiskTo copy a floppy file to the hard disk as shown in Figure 4–38, enter ‘6’ at the Har

166 DC 900-1333PFreeway User Guide4.7.2 Hard Disk Maintenance OptionsTo access the Hard Disk Maintenance Options menu as shown in Figure4–39, enter ‘3

4: OperationsDC 900-1333P 1674.7.2.1 Display Hard Disk DirectoryTo display the hard disk directory as shown in Figure 4–40, enter ‘2’ at the Hard Disk

168 DC 900-1333PFreeway User Guide4.7.2.2 Build Hard Disk from Boot ServerTo build the hard disk from the boot server, enter ‘3’ at the Hard Disk Main

4: OperationsDC 900-1333P 169Freeway 2000/4000/8800 uses the VxWorks DOS file system long name support feature.This feature allows the use of file nam

PrefaceDC 900-1333P 17• Cables for connecting Freeway to the LAN and WAN• Synchronous modem for loopback testingOrganization of DocumentChapter 1 give

170 DC 900-1333PFreeway User Guide• Freeway 2000/4000/8800: freeway/icpcode/icp6000/protocols/x25_fw_6000.mem• the system boot file:• Freeway 1100/115

4: OperationsDC 900-1333P 171on page148 describes how to modify the boot parameters. Any changes made to theseparameters are stored in Freeway’s non-v

172 DC 900-1333PFreeway User GuideStep 4: Boot Freeway from the Boot ServerTo verify that the boot parameters are correct, boot Freeway by selecting “

4: OperationsDC 900-1333P 1733. Opens the boot configuration file on the hard disk to determine the ICP devicename and the name of the ICP download sc

174 DC 900-1333PFreeway User Guide8. Repeats Step4 through Step 7 for all download script files listed in the boot con-figuration file9. Copies any mo

4: OperationsDC 900-1333P 175Figure 4–42: Boot Parameters Modified to Boot from Hard DiskFreeway System Boot Parameters------------------------------E

176 DC 900-1333PFreeway User GuideLog in to the Freeway server with the default user name (simpact) and password(password). You can log in from the lo

4: OperationsDC 900-1333P 1774.7.2.3 Delete Hard Disk FileTo delete a hard disk file as shown in Figure 4–43, enter ‘4’ at the Hard Disk Mainte-nance

178 DC 900-1333PFreeway User Guide4.7.2.4 Rename Hard Disk FileTo rename a hard disk file as shown in Figure 4–44, enter ‘5’ at the Hard Disk Mainte-n

4: OperationsDC 900-1333P 179Figure 4–44: Rename Hard Disk FileEnter file name to rename:

18 DC 900-1333PFreeway User GuideHardware Support• Freeway 500 Hardware Installation GuideDC-900-2000• Freeway 1100/1150 Hardware Installation GuideDC

180 DC 900-1333PFreeway User Guide4.7.3 Floppy Disk Copy OptionsTo access the Floppy Disk Copy Options menu as shown in Figure 4–45, enter ‘4’ at theD

4: OperationsDC 900-1333P 1814.7.3.1 Display Floppy Disk DirectoryTo display the floppy disk directory as shown in Figure 4–46, enter ‘2’ at the Flopp

182 DC 900-1333PFreeway User Guide4.7.3.2 Display Floppy Disk FileTo display a floppy disk file as shown in Figure4–47, enter ‘3’ at the Floppy Disk C

4: OperationsDC 900-1333P 1834.7.3.3 Copy Boot Server File to Floppy DiskTo copy a boot server file to the floppy disk as shown in Figure 4–48, enter

184 DC 900-1333PFreeway User Guide4.7.3.4 Copy Floppy Disk File to Hard DiskTo copy a floppy disk file to the hard disk as shown in Figure 4–49, enter

4: OperationsDC 900-1333P 1854.7.3.5 Copy Hard Disk File to Floppy DiskTo copy a hard disk file to the floppy disk as shown in Figure4–50, enter ‘6’ a

186 DC 900-1333PFreeway User Guide4.7.4 Floppy Disk Maintenance OptionsTo access the Floppy Disk Maintenance Options menu as shown in Figure4–51, ente

4: OperationsDC 900-1333P 1874.7.4.1 Display Floppy Disk DirectoryTo display the floppy disk directory as shown in Figure 4–52, enter ‘2’ at the Flopp

188 DC 900-1333PFreeway User Guide4.7.4.2 Delete Floppy Disk FileTo delete a floppy disk file as shown in Figure4–53, enter ‘3’ at the Floppy Disk Mai

4: OperationsDC 900-1333P 1894.7.4.3 Rename Floppy Disk FileTo rename a floppy disk file as shown in Figure 4–54, enter ‘4’ at the Floppy Disk Main-te

PrefaceDC 900-1333P 19Application Program Interface (API) Programming Support• Freeway Data Link Interface Reference GuideDC-900-1385• Freeway Transpo

190 DC 900-1333PFreeway User Guide4.8 Run VxWorks ShellTo access the VxWorks shell as shown in Figure 4–55, enter ‘6’ at the Freeway Interac-tive Menu

4: OperationsDC 900-1333P 191Loading symbol table from scribe:/rose/ron/2/freeway/boot/fw486.sym ...done0x382fbc (int_act): STATUS: Spawning VxWorks S

192 DC 900-1333PFreeway User Guide4.9 Example SRA MenuTo access the Example SRA Menu as shown in Figure4–56, enter ‘7’ at the FreewayInteractive Menu.

4: OperationsDC 900-1333P 1934.9.1 Display Loaded ModulesTo display the object modules that have been loaded onto Freeway as shown inFigure 4–57, ente

194 DC 900-1333PFreeway User GuideEnter number of minutes to run (1 - 60): 1Task "sraalp" spawned. (1 minutes).Press RETURN to continue0x591

4: OperationsDC 900-1333P 1954.10 LogoutTo logout of your Freeway session, select the Logout option in the Freeway InteractiveMenu. If you logout from

196 DC 900-1333PFreeway User Guide

DC 900-1333P 197AppendixAInstallation at a GlanceAfter you are familiar with the detailed software installation procedures described inChapter 2, you

198 DC 900-1333PFreeway User GuideA.1 UNIX InstallationsStep 1: Install the Freeway software Chapter 2NoteRemember that the ppp variable indicates the

A: Installation at a GlanceDC 900-1333P 199d. Modify the name of the load file in each download_script entry.e. If you have moved the load file from t

Protogate, Inc.12225 World Trade Drive, Suite RSan Diego, CA 92128(858) 451-0865Freeway User Guide© 2002 Protogate, Inc. All rights reservedPrinted in

20 DC 900-1333PFreeway User GuideDocument ConventionsThe term “Freeway” refers to any of the Freeway models (for example, 1100, 1150, 1200,1300, 2000,

200 DC 900-1333PFreeway User Guidec. Run the make file:cd /usr/local/freeway/libmake -f Makefile.op-sys allThe op-sys variable indicates the operating

A: Installation at a GlanceDC 900-1333P 201e. Run the make file:cd /usr/local/freewayFor a Freeway 1100/1150/1200/1300:/usr/wind/host/sun4-sunos4/bin/

202 DC 900-1333PFreeway User Guide(Freeway 2000/4000/8800 with an MVME 162 CPU) or freeway/envppc file(Freeway 2000/4000/8800 with an MVME 2600 CPU).c

A: Installation at a GlanceDC 900-1333P 203Step 9: Modify the Freeway system boot parameters page 93If you did not install the software in /usr/local

204 DC 900-1333PFreeway User GuideA.2 VMS InstallationsStep 1: Install the Freeway software Chapter 2NoteRemember that the ppp variable indicates the

A: Installation at a GlanceDC 900-1333P 205d. If you have moved the load file from the BOOT directory, enter the pathname for the load file in each do

206 DC 900-1333PFreeway User GuideStep 5: Build the CS API library file (X.25 only) page 70a. Run the MAKEVMS command:SET DEF SYS$SYSDEVICE[FREEWAY.LI

A: Installation at a GlanceDC 900-1333P 207c. Run the MAKEVMS command:@MAKEVMS "" [MULTINET, TCPWARE, or UCX]The newly created files will be

208 DC 900-1333PFreeway User GuideA.3 Windows NT InstallationsStep 1: Install the Freeway software Chapter 2NoteRemember that the ppp variable indicat

A: Installation at a GlanceDC 900-1333P 209e. If you will be using the SRA, uncomment the lines sra_module = sraxxx.o1and sra_entry = sraInit to load

PrefaceDC 900-1333P 21DC 900-1333G March 1996 Updated for version 2.4 releaseRemoved bootp informationClarified server toolkit informationReplaced X.2

210 DC 900-1333PFreeway User GuideThe newly created files will be placed in the proper freeway\client\ op-sys\binor freeway\client\op-sys\lib director

A: Installation at a GlanceDC 900-1333P 211Step 6: Compile the example SRA page 87a. Modify the path assigned to FWBASE in the freeway\envcom file.b.

212 DC 900-1333PFreeway User GuideStep 7: Compile the Server Toolkit page 89To build a customized Freeway image using the optional Server Toolkit prod

A: Installation at a GlanceDC 900-1333P 213Step 8: Build the loopback tests (except the example SRA) page 90cd C:\freeway\client\test\pppa. Edit the c

214 DC 900-1333PFreeway User GuideStep 11: Run the loopback test Freeway Loopback Test ProceduresRefer to the Freeway Loopback Test Procedures to run

DC 900-1333P 215AppendixBFreeway FilesB.1 Default Directory StructureAfter you have installed the Freeway files as described in Chapter 2, the files r

216 DC 900-1333PFreeway User GuideB.1.2 ICP-resident SoftwareICP-resident software includes any software that runs on the Freeway ICPs. This soft-ware

DC 900-1333P 217GlossaryThe common Freeway terms and acronyms are defined below. BOOTP Bootstrap protocolboot server A client computer that downloads

218 DC 900-1333PFreeway User GuideFreeway Freeway refers to the entire server in terms of hardware andsoftware. The hardware includes items such as th

GlossaryDC 900-1333P 219LAN protocol The hardware and software which comprise the LAN and formthe basis of communications between Freeway servers and

22 DC 900-1333PFreeway User GuideCustomer SupportIf you are having trouble with any Protogate product, call us at (858) 451-0865 Mondaythrough Friday

220 DC 900-1333PFreeway User GuideSDK Software development kitserver processor The Freeway server processor board, which is capable of execut-ing the

GlossaryDC 900-1333P 221task “Ta sk ” is used to differentiate between code executing onFreeway’s server processor board or the ICP, and code executin

222 DC 900-1333PFreeway User Guide

DC 900-1333P 223IndexAadded_interface_addr 107added_interface_mask 107added_interface_type 106Addressadded interface 107foreign 109local 109local inte

224 DC 900-1333PFreeway User Guidebootcfg.vme 38Booting Freeway 122boot parameters 148Internet addresses 34, 35process 94reset action selection 153Buf

IndexDC 900-1333P 225Floppy disk, delete file 188Floppy disk, display directory 181, 187Floppy disk, display file 182Floppy disk, maintenance 186Flopp

226 DC 900-1333PFreeway User Guidedisplay options 125, 130, 131, 132, 133, 134display configuration 126display boot parameters 129display physical con

IndexDC 900-1333P 227foreign 109local 109Processor number 151Productfeatures 25Product support 22Protocol softwareUNIX 42VMS 59Windows NT 79Protogate

228 DC 900-1333PFreeway User GuideTechnical support 22telnet 26, 94Time to live 110Time, modify system 155Time, system 146Toolkit softwareUNIX 42VMS 5

Freeway User GuideDC 900-1333PCustomer Report FormWe are constantly improving our products. If you have suggestions or problems you wouldlike to repor

DC 900-1333P 23Chapter1Freeway IntroductionThis manual describes how to install and operate software on your Freeway server.Before installing the serv

Protogate, Inc.Customer Service12225 World Trade Drive, Suite RSan Diego, CA 92128

24 DC 900-1333PFreeway User GuideFreeway can be configured with multiple WAN interface processor boards, each ofwhich is a Protogate ICP. Each ICP run

1: Freeway IntroductionDC 900-1333P 25Summary of product features:• Provision of WAN connectivity either through a LAN-based Freeway server ordirectly

26 DC 900-1333PFreeway User Guide1.2 Freeway ConceptsThe following concepts support the Freeway features described in Section1.1.1.2.1 Freeway Service

1: Freeway IntroductionDC 900-1333P 271.2.4 SNMP SupportFreeway software provides an SNMP v1/v2c-compliant SNMP agent that supportsread-only SNMP acce

28 DC 900-1333PFreeway User Guide

DC 900-1333P 29Chapter2Software InstallationThis chapter describes how to install the Freeway server/client, protocol, and toolkitsoftware. You must h

DC 900-1333P 3ContentsList of Figures 9List of Tables 13Preface 151 Freeway Introduction 231.1 Freeway Overview... 231.2 F

30 DC 900-1333PFreeway User GuideTabl e 2–1 summarizes the software installation steps.Table 2–1: Summary of Software Installation StepsSteps Referenc

2: Software InstallationDC 900-1333P 31The software installation procedures described in this chapter refer to file names thatinclude a “ppp” identifi

32 DC 900-1333PFreeway User Guide2.1 Configure the Boot ServerBefore you can boot Freeway, the boot server and Freeway must be configured to com-munic

2: Software InstallationDC 900-1333P 332.1.1 Configure FTP or RSHThe boot server must support the file transfer protocol (FTP) or remote shell (RSH).R

34 DC 900-1333PFreeway User GuideIn UNIX systems, the files to which Freeway requires access are in the default/usr/local/freeway directory which is c

2: Software InstallationDC 900-1333P 35For Windows NT systems, the Internet addresses and system names of computers onthe network are maintained in th

36 DC 900-1333PFreeway User GuideStep 2: Select a system name and Internet address for the Freeway server and enterthem on a line in the hosts files

2: Software InstallationDC 900-1333P 372.2 Install the Freeway Software onto a UNIX ComputerThis section describes how to install the Freeway software

38 DC 900-1333PFreeway User Guide2.2.1.1 Server/Client SoftwareThe server/client distribution media is labeled Freeway Server Software. The following

2: Software InstallationDC 900-1333P 39• fw2604 is the system boot file for a Freeway 2000/4000/8800 with an MVME 2600CPU • fw486.sym is the symbol ta

4 DC 900-1333PFreeway User Guide2.2.2.3 CPIO Format Distributions... 452.2.3 Modify the Boot and Load Files... 452.2.

40 DC 900-1333PFreeway User Guide• fw162d is the debug version of the standard system boot file for a Freeway2000/4000/8800 with an MVME 162 CPU 9 or

2: Software InstallationDC 900-1333P 412.2.1.2 Server Toolkit SoftwareThe Server Toolkit distribution media is labeled Freeway Server Toolkit Software

42 DC 900-1333PFreeway User Guide2.2.1.3 Protocol or Protocol Toolkit SoftwareThe protocol or protocol toolkit distribution media is labeled Freeway [

2: Software InstallationDC 900-1333P 43Source code for the OS/Impact delivered with the protocol toolkit is in the freeway/ icp-code/os_sds directory.

44 DC 900-1333PFreeway User GuideStep 3: Insert the protocol or toolkit distribution media into the appropriate drive.For CD-ROM distributions, follow

2: Software InstallationDC 900-1333P 452.2.2.3 CPIO Format DistributionsIf the files on your distribution media are in cpio format, use the cpio comma

46 DC 900-1333PFreeway User GuideThe download_script parameter in the boot configuration file defines the path name ofthe load file. The load file con

2: Software InstallationDC 900-1333P 475. If you will be using the server-resident application (SRA), uncomment the linessra_module = sraxxx.o1 and sr

48 DC 900-1333PFreeway User Guide2.2.4 Build the DLI and TSI FilesBuild the DLI and TSI files needed by the Freeway software. A make file is included

2: Software InstallationDC 900-1333P 492. From your op-sys directory, create the bin and lib directories if they don’t alreadyexist.cd op-sysmkdir bin

ContentsDC 900-1333P 53 Customize the System Configuration 973.1 Determine If You Need to Customize System Configuration... 983.2 Customize the D

50 DC 900-1333PFreeway User Guide2.2.6 Compile the Example Server-Resident ApplicationTo build the example SRA, you must have installed a GNU cross co

2: Software InstallationDC 900-1333P 51Step 3: Run the make fileFrom the freeway directory, enter one of the make commands listed below. This com-pile

52 DC 900-1333PFreeway User Guide2.2.7 Compile the Server ToolkitTo build a customized Freeway image using the optional Server Toolkit product, youmus

2: Software InstallationDC 900-1333P 53Step 3: Run the make file.From the freeway directory, enter one of the following commands. This compiles all th

54 DC 900-1333PFreeway User Guidechanging the default value of the Freeway server parameter, freeway_0, to the name (orInternet address) of your curre

2: Software InstallationDC 900-1333P 55If you are installing DDCMP, protocol toolkit, or X.25 on Freeway 1100/1150/1200/1300, skip to Step 3. The elec

56 DC 900-1333PFreeway User Guidemake -f makefile.sol all (for a Solaris system)make -f makefile.sun all (for a SunOS system)Go to Section 2.5 on pag

2: Software InstallationDC 900-1333P 572.3 Install the Freeway Software onto a VMS ComputerThis section describes how to install the Freeway software

58 DC 900-1333PFreeway User GuideThe following general files are in the FREEWAY.BOOT directory:• BOOTCFG.IP is an example boot configuration file for

2: Software InstallationDC 900-1333P 59• XIO_2424.MEM XIO_2432.MEM, or XIO_6000.MEM1 are the executable objectsfor the system-services moduleVarious f

6 DC 900-1333PFreeway User Guide4.4.5.3 Display IP Statistics... 1444.4.5.4 Display ICMP Statistics... 1454.4.6

60 DC 900-1333PFreeway User GuideFor software releases prior to June 1, 1998, the executable object for the protocol or pro-tocol toolkit software, pp

2: Software InstallationDC 900-1333P 61You might find it useful to perform the installation at a hardcopy terminal. This pro-vides a printed record th

62 DC 900-1333PFreeway User Guide• Do you have adequate account quotas for installing software? VMSINSTAL checksfor the various quota values.• Is DECn

2: Software InstallationDC 900-1333P 63Step 6: The computer displays:Enter the products to be processed from the first distributionvolume set.* Produc

64 DC 900-1333PFreeway User GuideThe following products will be processed:The computer displays product names, then displays the following (Vnnnn is t

2: Software InstallationDC 900-1333P 65Remember that ddcu means a device name. Press <return> to answer yes (this is highlyrecommended). If you

66 DC 900-1333PFreeway User Guide2.3.3 Modify the Boot and Load FilesEdit the boot configuration and load files to match your Freeway setup. Your Free

2: Software InstallationDC 900-1333P 67Edit the boot configuration file ([FREEWAY.BOOT]BOOTCFG.xxx1) as follows:1. Uncomment the physical parameters a

68 DC 900-1333PFreeway User GuideStep 2: Edit the load file (pppLOAD)Freeway server release G (and later) installs the XIO image files in the FREEWAY.

2: Software InstallationDC 900-1333P 692.3.4 Build the DLI and TSI FilesBuild the DLI and TSI files needed by the Freeway software. A make command isi

ContentsDC 900-1333P 7A Installation at a Glance 197A.1 UNIX Installations ...198A.2 VMS Installations...

70 DC 900-1333PFreeway User Guide2. From your OP-SYS directory, create the BIN and LIB directories if they don’talready exist.SET DEF OP-SYSCREATE /DI

2: Software InstallationDC 900-1333P 712.3.6 Build the QIO/SQIO API Library FileIf you have purchased the QIO/SQIO API, you must build the library fil

72 DC 900-1333PFreeway User GuideNoteThere is a separate server TSI configuration file, usually calledMUXCFG, which does not require modification for

2: Software InstallationDC 900-1333P 73Open each file and locate each occurrence of ElecInterface. Remove the double slashes(//) from the beginning of

74 DC 900-1333PFreeway User GuideNoteThe installed files have an owner User Identification Code(OWNER_UIC) of [1,4] that corresponds to the SYSTEM acc

2: Software InstallationDC 900-1333P 752.4 Install the Freeway Software onto a Windows NT ComputerThis section describes how to install the Freeway so

76 DC 900-1333PFreeway User GuideThe following files are in the freeway\boot directory:• bootcfg.ip is an example boot configuration file for ICP_IP v

2: Software InstallationDC 900-1333P 77• xio_2424.mem, xio_2432.mem, or xio_6000.mem1 are the executable objects for thesystem-services moduleThe foll

78 DC 900-1333PFreeway User Guide• sps_fw_2432.mem, sps_fw_6000.mem, and sps_fw_2424.mem are the executableobjects for the protocol toolkit used with

2: Software InstallationDC 900-1333P 79The Freeway server software library archive called libserv.a and the server DLI/TSIobject library called libvxw

8 DC 900-1333PFreeway User Guide

80 DC 900-1333PFreeway User Guidedistributed in the freeway\icpcode\icpxxxx\protocols directory. For releases after June 1,1998, these files are in th

2: Software InstallationDC 900-1333P 81If your Windows NT computer does not have a browser enabled, open the readme.txt fileon the CD-ROM and follow t

82 DC 900-1333PFreeway User Guide2.4.3 Modify the Boot and Load FilesEdit the boot configuration and load files to match your Freeway setup. Your Free

2: Software InstallationDC 900-1333P 83Edit the boot configuration file (freeway\boot\bootcfg.xxx1) as follows: 1. Uncomment the physical parameters a

84 DC 900-1333PFreeway User Guiderelease date prior to June 1, 1998 contain a fully qualified path for the protocol and XIOimage files. Such files sho

2: Software InstallationDC 900-1333P 852. From your op-sys directory, create the bin and lib directories if they don’t alreadyexist.cd op-sysmkdir bin

86 DC 900-1333PFreeway User GuideStep 3: Dynamic link libraries must reside in the current working directory or in adirectory specified in your “PATH”

2: Software InstallationDC 900-1333P 872.4.6 Compile the Example Server-Resident ApplicationTo build the example SRA, you must have installed a GNU cr

88 DC 900-1333PFreeway User GuideIf you are using the GNU tool set distributed with Tornado to compile your SRA, youmust create a custom build project

2: Software InstallationDC 900-1333P 892.4.7 Compile the Server ToolkitTo build a customized Freeway image using the optional Server Toolkit product,

DC 900-1333P 9List of FiguresFigure 1–1: Freeway Configuration... 24Figure 2–1: Sample UNIX /etc/hosts File ...

90 DC 900-1333PFreeway User Guide-f MakeSTK.I486 clean allFor a Freeway 2000/4000/8800 with an MVME 162 CPU:-f MakeSTK.68K clean allFor a Freeway 2000

2: Software InstallationDC 900-1333P 91A client TSI configuration file might reference the server parameter more than once, andmust be changed at each

92 DC 900-1333PFreeway User Guidespecified when you run the loopback test. The electrical interface for X.25 is specified inthe .setup file in the fre

2: Software InstallationDC 900-1333P 932.5 Modify the Freeway System Boot ParametersIn the Freeway System Boot Parameters menu, modify the path name f

94 DC 900-1333PFreeway User Guide2.6 Boot Freeway It is assumed that you have configured the Freeway boot parameters as described in theappropriate Fr

2: Software InstallationDC 900-1333P 95CautionWith the example server-resident application (SRA) software spec-ified in the boot configuration file, t

96 DC 900-1333PFreeway User GuideThe Freeway Interactive Menu is then displayed. Chapter 4 describes the InteractiveMenu in detail. You can change the

DC 900-1333P 97Chapter3Customize the System ConfigurationFreeway system configuration information is contained in a boot configuration file anda serve

98 DC 900-1333PFreeway User Guide3.1 Determine If You Need to Customize System ConfigurationMost sites, especially sites using the default installatio

3: Customize the System ConfigurationDC 900-1333P 99• If you want to load a server-resident application (SRA) and/or spawn an SRA taskto run on Freewa